Wednesday, August 17, 2022

AES Adopts AES75 Standard for Loudspeaker Measurement

The Audio Engineering Society has announced the adoption and publication of AES75-2022, “AES standard for acoustics – Measuring loudspeaker maximum linear sound levels using noise.” The new standard addresses the need for a practical and cohesive procedure for the prediction of loudspeaker performance. AES75 is the result of extensive work by the AES Standards Committee’s SC-04-03-A Task Group, co-chaired by Merlijn van Veen (senior technical support and education specialist at Meyer Sound) and Roger Schwenke, Ph.D. (Meyer Sound senior scientist and innovation steward).

Predictive evaluation of loudspeaker performance based on published specifications has traditionally been challenging due to inconsistencies in both measurement procedures and in how measured parameters are reported. “Until now,” explains Roger Schwenke, “reading an SPL number on a datasheet often inspired more questions than answers regarding test signals used and procedures for measurement. Most important to the end user is how the loudspeaker will perform with typical audio signals and whether the numbers can be compared apples-to-apples with numbers from one datasheet to another.

“AES75 addresses these issues by providing a detailed procedure as well as a specific test signal, M-Noise, whose RMS and peak levels as functions of frequency have been shown to better represent typical program material. Furthermore, AES75 is designed to be independently verifiable, using analysers and microphones typically used by audio professionals. By being independently verifiable, AES75 provides system specifiers and users a much more enforceable metric to use in quotes and architectural specs.”

The M-Noise test signal is based on Meyer Sound’s analysis of hundreds of music selections spanning all genres. The procedures documented in AES75 provide measurement of maximum linear sound levels by incrementally increasing playback levels until the magnitude or coherence of a loudspeaker’s acoustic reproduction of the M-Noise test signal reaches an unacceptable state. The AES75 test procedures cover performance measurements of both self-powered and externally powered loudspeakers.

Visit https://www.aes.org/publications/standards/search.cfm?docID=116

Related Articles

Stay Connected

1,470FansLike
1,523FollowersFollow
120SubscribersSubscribe

Latest Articles